跳到主要内容

Validator Operations

This guide covers the full lifecycle of operating a Monolythium validator, from initial setup through daily operations and maintenance.

Prerequisites​

Before becoming a validator, ensure you have:

  • A fully synced node (see Testnet Setup or Mainnet Setup)
  • At least 200,000 LYTH (100,000 LYTH for the registration burn + 100,000 LYTH minimum self-delegation)
  • A server meeting the requirements (4+ CPU, 16 GB RAM, 500 GB+ NVMe SSD for production)
  • Familiarity with the Security Guide

Validator Setup​

The guided setup wizard walks you through each step:

monarch validator setup

This interactive wizard covers:

  1. Key creation (or recovery from an existing mnemonic)
  2. Account funding verification
  3. Validator registration transaction
  4. Status confirmation
  5. Monitoring setup

Manual Setup with monod​

If you prefer manual control, follow these steps:

1. Create a Validator Key​

# Using Monarch
monarch keys account create validator

# Using monod directly
monod keys add validator --keyring-backend file
Mnemonic Backup

The mnemonic phrase is displayed exactly once. Write it down immediately and store it in a secure offline location. If you lose the mnemonic and the keyring, you lose access to your validator account permanently.

2. Fund the Account​

Send at least 200,000 LYTH to your validator account address:

# Show your validator account address
monarch keys account show validator
# Shows both mono1... (Cosmos) and 0x... (EVM) addresses

Use the faucet (Testnet) or transfer from an existing wallet.

3. Verify Funding​

# Check balance
monod query bank balances $(monod keys show validator -a --keyring-backend file)

You need at least 200000000000000000000000alyth (200,000 LYTH with 18 decimal places).

Validator Registration​

Using Monarch CLI​

monarch validator register \
  --from validator \
  --moniker "my-validator" \
  --amount 100000000000000000000000alyth \
  --commission-rate 0.10 \
  --website "https://myvalidator.com" \
  --details "Reliable validator for Monolythium"

Using monod Directly​

monod tx staking create-validator \
  --amount 100000000000000000000000alyth \
  --pubkey $(monod comet show-validator) \
  --moniker "my-validator" \
  --chain-id mono_6940-1 \
  --commission-rate 0.10 \
  --commission-max-rate 0.20 \
  --commission-max-change-rate 0.01 \
  --min-self-delegation 100000000000000000000000 \
  --from validator \
  --keyring-backend file \
  --gas auto \
  --gas-adjustment 1.5

Registration Costs​

ComponentAmountPurpose
Registration Burn100,000 LYTHBurned permanently, prevents spam
Minimum Self-Delegation100,000 LYTHStaked, earns rewards, can be unbonded later
Total Required200,000 LYTH

Verify Registration​

# Using Monarch
monarch validator status

# Using monod
monod query staking validator $(monod keys show validator --bech val -a --keyring-backend file)

Monitoring Your Validator​

Quick Status Check​

monarch status

This shows block height, sync status, peers, and validator info in a single view.

Health Audit​

monarch doctor

The 13-category audit checks system resources, configuration, connectivity, and validator-specific health including missed blocks and jailed status.

Enable Metrics Collection​

monarch metrics enable

This installs a cron job that collects 24 data points every 60 seconds. See Node Metrics for details on collected fields, event detection, and storage.

Using Monarch Connect​

For a graphical dashboard, use Monarch Connect to monitor your validators remotely via SSH. The Metrics tab provides interactive charts for block height, peers, CPU, memory, disk, validator rank, and missed blocks.

Set Up Alerts​

# Configure notification destinations (email, webhook, etc.)
monarch notify setup

# Test notifications
monarch notify test

# Register for Telegram alerts via the monitoring service
monarch monitor register --network Testnet --moniker "my-validator" --role validator
monarch monitor install

Commission Management​

View Current Commission​

monarch validator status

Edit Commission Rate​

monarch validator edit --from validator --commission-rate 0.08

Or with monod:

monod tx staking edit-validator \
  --commission-rate 0.08 \
  --from validator \
  --keyring-backend file \
  --chain-id mono_6940-1
Commission Constraints
  • Commission rate cannot exceed the max rate set during registration
  • Commission can only change by the max change rate per day
  • Plan your commission rate carefully at registration -- the max rate and max change rate are permanent

Unjailing​

If your validator misses too many blocks, it will be jailed. To unjail:

1. Check Why You Were Jailed​

# View missed blocks and signing info
monarch validator status

# Or query directly
monod query slashing signing-info $(monod comet show-validator)

2. Fix the Underlying Issue​

Common causes:

  • Node was offline (restart it)
  • Node lost peers (update peers with monarch peers update)
  • Disk was full (check with monarch doctor)
  • Configuration drift (fix with monarch repair)

3. Wait for the Jail Period to Expire​

The jail period is shown in the signing info query. You cannot unjail until this period has passed.

4. Unjail​

monarch validator unjail --from validator

Or with monod:

monod tx slashing unjail \
  --from validator \
  --keyring-backend file \
  --chain-id mono_6940-1

Key Backup​

Losing your validator key means losing your validator permanently. Back up regularly.

Full Key Backup​

monarch backup keys

This creates an encrypted archive of all keys (account, validator, node).

Validator Key Export​

monarch keys validator export

This exports the validator signing key encrypted with AES-256-GCM. Store the encrypted file in at least two offline locations.

Recovery​

# Restore from backup archive
monarch backup restore /path/to/backup/

# Import a specific validator key
monarch keys validator import /path/to/exported-key.json

# Recover an account key from mnemonic
monarch keys account recover validator

See the Security Guide for detailed backup procedures and the safe validator migration process.

Delegation and Governance​

Delegate Additional LYTH​

Increase your self-delegation or delegate to your own validator:

monarch stake delegate monovaloper1... 50000000000000000000000alyth --from validator

Unbond LYTH​

monarch stake unbond monovaloper1... 50000000000000000000000alyth --from validator
Unbonding Period

Unbonding takes 3 days. During this period, tokens are locked and do not earn rewards. If the validator is slashed during unbonding, unbonding tokens are also slashed.

Redelegate​

Move delegation from one validator to another without waiting for the unbonding period:

monarch stake redelegate monovaloper1... monovaloper2... 50000000000000000000000alyth --from validator

Withdraw Rewards​

# Withdraw from a specific validator
monarch rewards --from validator

# Withdraw from all validators
monarch rewards --from validator --all

Governance Participation​

Validators are expected to participate in governance:

# List active proposals
monarch gov list

# Vote on a proposal
monarch gov vote 1 yes --from validator

# Submit a new proposal
monarch gov submit --from validator --proposal proposal.json --deposit 10000000000000000000000alyth

Upgrades​

Binary Upgrades​

When a new monod version is released:

# Upgrade monod to a specific version
monarch upgrade --version v0.2.0

This stops the node, swaps the binary, and restarts.

Monarch Self-Update​

monarch upgrade self

This updates both Monarch CLI and OxidePM to the latest versions.

Coordinated Chain Upgrades​

For governance-approved chain upgrades at a specific block height:

  1. The upgrade proposal specifies the block height and new binary version
  2. The node will halt at the upgrade height
  3. Install the new binary: monarch upgrade --version <new-version>
  4. The node will automatically resume

Operational Checklist​

Daily​

  • Check monarch status -- node synced, not jailed, peers connected
  • Review missed blocks -- should be near zero

Weekly​

  • Run monarch doctor -- fix any warnings
  • Check disk usage -- plan for capacity
  • Review monarch metrics events -- look for anomalies

Monthly​

  • Test key backup restoration
  • Update Monarch CLI: monarch upgrade self
  • Review and vote on governance proposals
  • Check for monod updates